Steel Duplex

NOVA TRADING STOCK PROGRAM IN 1.4462 GRADE

HOT ROLLED AND COLD ROLLED SHEETS ACCORDING TO EN 10088-2, EN ISO 9445, EN ISO 9444, EN 10028-7

• The standard sheet sizes are: thickness x 1500 x 3000 mm

HOT ROLLED AND COLD ROLLED COILS ACCORDING TO EN 10088-2, EN ISO 9445, EN 10028-7

• Nova Trading coil stock consists of 1500 mm wide coils in thickness: 2 mm, 3 mm, 4 mm and 5 mm; maximum length – 12,000 mm or even 15,000 mm if the total weight does not exceeds 2,000 kg

• Please ask us about other duplex grades and sizes of sheets

Services offered by Nova Trading:

- cutting of coils into sheets

- slitting

- laser cutting

- waterjet cutting

- shearing

- bending

- welding

---------

GENERAL CHARACTERISTICS OF DUPLEX

• Ferritic-austenitic structure - balance between structures is 50% -50%

• They combine most of the benefits of ferritic and austenitic steel properties

ADVANTAGES

• Higher mechanical resistance than other grades

• High corrosion resistance - in particular stress corrosion, pitting corrosion and crevice corrosion

• PRE 35 Pitting Resistance Equivailent

• Very high strength

• The ability to reduce the thickness of elements and, as a result, reduce the weight and cost of construction

• Higher abrasion resistance

• Low thermal expansion

• Working temperature: from -40 to +250°C

TYPICAL APPLICATIONS

• In the paper, gas, mining and petrochemical industries

• Storage tanks

• Tanks and chemical tankers

• Pulp and paper industry applications such as digesters and process tanks

• Oil and gas industry applications such as flanges, valves, tubes and pipes

• Pressure tanks such as oxygen reactors

• Structural components in bridges

• Desalination and wastewater treatment plants

• Heat exchangers

CHEMICAL COMPOSITION

MECHANICAL PROPERTIES